Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car



Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
- Routine maintenance
   Schedule of routine maintenance of Subaru Legacy and Outback cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (according to the Schedule of routine maintenance)
   Replacement of motive oil and oil filter
   Check of a state and replacement of the hoses located in a motive compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of the steering drive
   Check and adjustment of composition of mix of idling, - a stern of the models equipped with the catalytic converter
   Check of a condition of protective covers of hinges of power shafts
   Check of a state, adjustment of effort of a tension of belts of the drive of auxiliary units
   Check and adjustment of the antiretractable device
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of the cooling system
   Check of a state and replacement of cooling liquid of the engine
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Replacement of brake liquid / pumping of a hydraulic path
   Replacement of ATF of automatic transmission
   Replacement of the RKPP transmission oil
   Replacement of greasings of back and forward differential
   Check of a state and replacement of a gas-distributing belt - l models 2.0 and 2.5
   Check and replacement of the fuel filter
   Check of a state and replacement of spark plugs and VV of an electrical wiring
   Check of wheel bearings
   Check of valvate gaps
   Replacement of belts of the drive of auxiliary units and replacement
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




d9f1bda0

Rotation of wheels

The recommended order of rotation of the wheels completed with radial tires of S NENAPRAVLENNYM a protector

1 — Left forward
2 — Right forward

3 — Left back
4 — Right back


The recommended order of rotation of the wheels completed with radial tires With the DIRECTED protector

1 — Left forward
2 — Right forward

3 — Left back
4 — Right back


Rotation of wheels has to be made regularly according to the schedule of routine maintenance of the car, and also at identification of signs of uneven wear of protectors. At rotation the car has to be lifted over the earth - take an opportunity and check also a condition of components of brake system (see the Sections Rotation of Wheels and Check and adjustments of brake system).

Authors of this manual recommend to make rotation of the wheels equipped with radial tires according to the offered scheme. The majority of models are completed with tires with the directed protector, - it is easy to distinguish the directed tires on existence on a sidewall of the arrow specifying the correct direction of rotation of a wheel. Two tires with the right direction of rotation and two - with left have to be included in the package.

The detailed description of procedure of change of wheels is stated in Poddomkrachivaniye's Section and towage. Track reliability of fixing of the car in the lifted situation.

It will be most correct to lift all car over the earth, - use the winch, or the car and install to a poddomkratta it on the props got under frame longerons.

 By no means use for fixing of the car in the lifted situation less than four props is inadmissible!


Upon completion of rotation check pressure of a rating of tires, correct it according to standard requirements. Make sure of reliability of fastening of wheels nuts (in an ideal wheel nuts should be tightened a dinamometrichesky key and to make repeated check through 40 km [25 miles] of run).

More detailed information on wheels and tires is stated in the Head Podvesk and steering an upravleniyena of the present manual.