|
1. The size of its movement from the top point to a point in which there is a feeling of resistance to squeezing, i.e. prior to activation of the hydraulic drive of the relevant system (coupling or brakes) is called as a free wheeling of a pedal. If the result of measurement exceeds the limit of admissible range, it is necessary to make the corresponding adjustment.
|
|
2. Press the lever of switching off of coupling for an utaplivaniye of a rod of a pusher of the executive cylinder and check, whether liquid level increases in the coupling liquid tank. |
3. If the level of working liquid of coupling increases, the free wheeling of a pedal of coupling is adjusted correctly.
4. If the level of working liquid of coupling does not increase, or there is no retraction of a pusher, it is necessary to make the corresponding adjustment (see the Head Stsepleniye).
5. Check the lower part of the main cylinder, a damper and the executive cylinder of coupling, and also all lines of a hydraulic path and their nipple connections for existence of signs of development of leaks. In case of need tighten the corresponding fixture / the weakened nipple sockets. Replace defective components.
6. Check the level of working liquid of coupling on a scale on outer side of the tank of the main cylinder. If level is below a mark of "MIN", make the corresponding adjustment, having added necessary amount of liquid of the demanded grade, - bring liquid level to a mark "MOVE", - try not to allow hits to the hydraulic highway of dirt.
|
|
Avoid mixing of hydraulic liquids of a different grade! |
|
