Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car

Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
- Routine maintenance
   Schedule of routine maintenance of Subaru Legacy and Outback cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (according to the Schedule of routine maintenance)
   Replacement of motive oil and oil filter
   Check of a state and replacement of the hoses located in a motive compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of the steering drive
   Check and adjustment of composition of mix of idling, - a stern of the models equipped with the catalytic converter
   Check of a condition of protective covers of hinges of power shafts
   Check of a state, adjustment of effort of a tension of belts of the drive of auxiliary units
   Check and adjustment of the antiretractable device
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of the cooling system
   Check of a state and replacement of cooling liquid of the engine
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Replacement of brake liquid / pumping of a hydraulic path
   Replacement of ATF of automatic transmission
   Replacement of the RKPP transmission oil
   Replacement of greasings of back and forward differential
   Check of a state and replacement of a gas-distributing belt - l models 2.0 and 2.5
   Check and replacement of the fuel filter
   Check of a state and replacement of spark plugs and VV of an electrical wiring
   Check of wheel bearings
   Check of valvate gaps
   Replacement of belts of the drive of auxiliary units and replacement
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Specifications

The recommended greasings and liquids

The greasings and liquids recommended for use of cars by the company manufacturer at the time of drawing up the present manual are listed below. Fresher information can be received at firm car repair shops of the Subaru company.

Type and properties of working liquids

Fuel

Type

Models with the catalytic converter

Unleaded gasoline with octane number is not lower than 95 (AI)

Models without catalytic converter

Gasoline with octane number is not lower than 90 (AI)

Motive oil

Type

Universal engine oil for petrol engines of the class SH or SJ on classification of API, with marking of "ENERGY CONSERVING II" (Energy saving II), - if it is impossible to get SH or SJ, class SG oil use, or G4 or G5 on classification of CCMC, or A1, A2, A3 on classifications of ACEA, and also other oils on condition of existence on packing of a new certification mark of API - "Starburst" is allowed.

Viscosity 5W/30 for a frigid climate, 10W/40 (10W/30) for temperate and hot climate.

At operation of the car in areas with an arid climate and high temperature or in other intense conditions oil for petrol engines of the class SH or SJ on API with number of viscosity on 30, 40, 10W-50, 20W-40 or 20W-50 on SAE has to be used.

Card of vyazkost of motive oil

Cooling liquid

Type

Firm Subaru antifreeze of the demanded concentration

Brake fluid and hydraulic liquid of the drive of coupling

Type

No. 116 FMVSS, fresh DOT 3 or DOT 4 brake fluid

GUR hydraulic liquid

Type

ATF Dexron III, is desirable productions BP, CALTEX, CASTROL, MOBIL, SHELL or TEXACO

Transmission liquid for AT

Type

ATF DEXRON III

Viscosity

The card of vyazkost of transmission oil for RKPP and forward differential of AT

Greasing for the chassis

Type

Lithium NGLI greasing No. 2

Coolant of the air conditioning system

Type

HFC-134a (CH2FCF3)

Volumes of working liquids, l *

Fuel tank

Motive oil (including an oil filter) **
L models 2.0 and 2.5

Full volume

4.0

Filling volume

4.0

Models of 3.0 l

Full volume

6.8

Filling volume

5.8

** The level raising from the lower mark in a probe edge to top requires about 1 l of oil.

Cooling liquid (to the FULL level)

Legacy
Models of 2.0 l

WITH RKPP

7.0

WITH AT

6.9

Models of 2.5 l

WITH RKPP

6.8

WITH AT

6.7

Outback
Models of 2.5 l

WITH RKPP

6.8

WITH AT

6.7

Models of 3.0 l

7.7

Transmission oil for RKPP

Models with a two-level reducer

4.0

Models without two-level reducer

3.5

Transmission liquid for AT (to merge and fill)

Engines of 2.0 l

8.4 ÷ 8.7

L engines 2.5 and 3.0

9.3 ÷ 9.6

Differentials

Forward differential of AT

1.1 ÷ 1.2

Back differential

0.8

GUR working liquid

0.7

* All volumes are specified only approximately, - at adjustment be verified with-level tags.

Engine

See Specifications to Heads the Engine, Power supply systems and release and Electric equipment of the engine

System of ignition

See Specifications to the Head Elektrooborudovaniye of the engine.

Brake system

See Specifications to the Head Brake system.

Suspension bracket and steering drive

See Specifications to the Head Podvesk and a steering.

Efforts of a tightening of threaded connections, Nanometer

See Specifications to the corresponding Heads of the Management.

Efforts of a tightening of threaded connections are given also in the text of the Head and on sopr. illustrations.