Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car

Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
- Routine maintenance
   Schedule of routine maintenance of Subaru Legacy and Outback cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (according to the Schedule of routine maintenance)
   Replacement of motive oil and oil filter
   Check of a state and replacement of the hoses located in a motive compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of the steering drive
   Check and adjustment of composition of mix of idling, - a stern of the models equipped with the catalytic converter
   Check of a condition of protective covers of hinges of power shafts
   Check of a state, adjustment of effort of a tension of belts of the drive of auxiliary units
   Check and adjustment of the antiretractable device
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of the cooling system
   Check of a state and replacement of cooling liquid of the engine
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Replacement of brake liquid / pumping of a hydraulic path
   Replacement of ATF of automatic transmission
   Replacement of the RKPP transmission oil
   Replacement of greasings of back and forward differential
   Check of a state and replacement of a gas-distributing belt - l models 2.0 and 2.5
   Check and replacement of the fuel filter
   Check of a state and replacement of spark plugs and VV of an electrical wiring
   Check of wheel bearings
   Check of valvate gaps
   Replacement of belts of the drive of auxiliary units and replacement
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of wheel bearings

Design of stupichny assembly of a forward wheel

1 — the Internal epiploon
2 — the Lock ring
3 — the Bearing
4 — the Rotary fist

5 — the External epiploon
6 — an ABS sensor Rotor
7 — the Stupichny bolt
8 — the Nave

Forward wheel bearing

PERFORMANCE ORDER

First of all it is necessary to check a condition of greasing of the wheel bearing.

1. A car front also establish to Poddomkratta it on props.
2. For an assessment of size of a side play of the wheel bearing undertake a hand a forward wheel and shake it outside and inside.
3. Give wheel nuts and remove a forward wheel.
4. At identification of a side play, fix the dial measuring instrument of plunger type on stupichny assembly and make measurement of size of axial shift. Compare result of measurement to requirements of Specifications.
5. Give samokontryashchiyesya nuts, remove bolts and disconnect the cross lever of a suspension bracket from a cross beam.
6. Lungs percussion take a spring pin of fastening on a spindle of transmission of the vibropogoloshchayushchy tripodny hinge of free rotation (SFJ). Remove the hinge from a spindle.
7. One hand holding a power shaft in horizontal situation, and rotating another a wheel nave, check assembly for existence of extraneous noises, breakthroughs and other signs of violation of smoothness of the course. In case of need remove a power shaft and check a condition of components of stupichny assembly (the bearing, epiploons and so forth).

Back wheel bearing

PERFORMANCE ORDER

1. A car back also establish to Poddomkratta it on props.
2. For an assessment of size of a side play of the wheel bearing undertake a hand a back wheel and shake it outside and inside.
3. Give wheel nuts and remove a back wheel.
4. At identification of a side play, fix the dial measuring instrument of plunger type on stupichny assembly and make measurement of size of axial shift. Compare result of measurement to requirements of Specifications.
5. Disconnect the hinge of double compensation (DOJ) of a back power shaft from back differential.

6. One hand holding a power shaft in horizontal situation, and rotating another a wheel nave, check assembly for existence of extraneous noises, breakthroughs and other signs of violation of smoothness of the course. In case of need remove a power shaft and check a condition of components of stupichny assembly (the bearing, epiploons and so forth).

7. Holding one hand a forward leading shaft in horizontal situation, other hand rotate assembly of a nave to establish existence or lack of noise or friction. If assembly of a nave of a back wheel rotates with noise or friction, sort a back axis and check a condition of epiploons, bearings, etc.