Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car



Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
- Routine maintenance
   Schedule of routine maintenance of Subaru Legacy and Outback cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (according to the Schedule of routine maintenance)
   Replacement of motive oil and oil filter
   Check of a state and replacement of the hoses located in a motive compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of the steering drive
   Check and adjustment of composition of mix of idling, - a stern of the models equipped with the catalytic converter
   Check of a condition of protective covers of hinges of power shafts
   Check of a state, adjustment of effort of a tension of belts of the drive of auxiliary units
   Check and adjustment of the antiretractable device
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of the cooling system
   Check of a state and replacement of cooling liquid of the engine
   Replacement of the filtering air cleaner element
   Check of a condition of components of a power supply system
   Replacement of brake liquid / pumping of a hydraulic path
   Replacement of ATF of automatic transmission
   Replacement of the RKPP transmission oil
   Replacement of greasings of back and forward differential
   Check of a state and replacement of a gas-distributing belt - l models 2.0 and 2.5
   Check and replacement of the fuel filter
   Check of a state and replacement of spark plugs and VV of an electrical wiring
   Check of wheel bearings
   Check of valvate gaps
   Replacement of belts of the drive of auxiliary units and replacement
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




d9f1bda0

Check and adjustment of the antiretractable device

 PERFORMANCE ORDER

1. Make a car stop on rise with the steepness of a slope for check of serviceability of functioning of the antiretractable device not less than 3 °.

2. If the car does not keep on a slope not movably, tighten an adjusting nut of a driving cable of the valve of deduction of pressure (PHV).

3. Violation of serviceability of start-off of the car after a stop can speak delay of the moment of an otpuskaniye of the antiretractable device in relation to the coupling inclusion moment (turns of the engine will start falling sharply) rise, - gradually, in stages weaken an adjusting nut.
Too early otpuskaniye of the antiretractable device leads to slow sliding of the car downhill, - tighten a nut with a stock, then slowly release it until achieve satisfactory result.

 During adjustment hold a cable from a provorachivaniye flat-nose pliers.

4. If the PHV valve, a returnable spring or a driving cable are damaged, make their replacement.