|
1. Details of installation of a front bumper are presented on an illustration.
2. Open a cowl.
3. Disconnect a negative wire from the battery.
4. For the purpose of ensuring access to fasteners unbend forward edges of loker of protection of wheel arches.
5. Take the lower lateral plastic clamps of fastening of an overlay of a bumper (on two from each party of a bumper).
6. Take the top and lower plastic clamps, slightly delay an overlay of a bumper and disconnect an electrical wiring from fog lights.
7. Remove an overlay of a bumper, give two fixing nuts and remove a bumper beam
8. Installation is made upside-down. Track that fixing nuts were tightened with the demanded effort. |
