Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car



Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Service of loops and locks of the car
   Replacement wind and the other fixed glasses
   Removal and installation of a decorative front grille
   Removal and installation of the panel of protection of a case
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of loker of protection of arches of forward wheels
   Removal and installation of lateral overlays of body panels
   Removal and installation of a forward fairing
   Removal and installation of a back spoiler
   Removal and installation of lateral spoilers
   Removal and installation profile directing the top luggage carrier
   Removal installation of the main ware box
   Removal and installation of elements of the central console
   Removal and installation of the dashboard
   Removal and installation of panels of an internal upholstery of doors, including a back door (the Station wagon models Legacy and Outback) and a cover of a luggage compartment (Sedan model)
   Removal and installation of elements of internal finishing
   Seat belts - the general information, check of a state, removal and installation, an order of utilization of not worked emergency natyazhitel
   Removal, service and installation of seats
   Removal, installation and adjustment of a cowl
   Removal, installation and adjustment of the lock of a cowl
   Removal and installation of forward wings
   Removal, installation and adjustment of door panels
   Removal, service and installation of components of the top hatches
   Removal, installation and check of components of castle assemblies
   Removal, installation and adjustment of door glasses and components of window regulators
   Removal, service and installation of rear-view mirrors
   Removal, service and installation of screen wipers and components of a path of supply of the washing liquid
   Control body sizes
+ Onboard electric equipment




d9f1bda0

Control body sizes

Arrangement of points of measurement

The directing openings, reperny points, technological windows and the other fixed fragments of body panels are used at installation of replaceable elements, providing possibility of their faultless installation.

 Reperny (basic) points are symmetrized rather diametrical plane of the car.


Scheme of an arrangement of reference points of measurement of salon (Sedan model)

13 — the Fixing opening of the central level under M6 bolt in rack-mount part of a forward wing
14 — the Fixing opening of the lower level under M6 bolt in rack-mount part of a forward wing
19 — the Opening of 3.2 mm under landing of a clamp in a lateral beam of a roof
20 — the Opening of the central level of 14 mm in the central body rack
21 — the Opening under a bolt of M10 of fastening of an adjusting plate of a seat belt of a forward seat
22 — the Opening of 20 mm in a threshold of a back door
23 — the Opening of 20 mm under fastening of the sensor switch of a back door

64 — the Measured opening of the lower level of 13 mm in the central body rack
81 — the Opening of 8 mm in the central part of the back shelf of salon
82 — the Measured opening of 7 mm in a back partition of salon
85 — the Measured opening of 20 mm in the back lateral panel of a body
87 — the Opening of 6.2 mm
88 — the Square opening of 8х8 mm under landing of a clamp in a lateral beam of a roof
92 — the Opening of 6 mm in the back shelf of salon


Scheme of an arrangement of reference points of measurement of back part of a body (Sedan model)

38 — the Extended opening of 18х36 mm under fastening of the dashboard
46 — the Opening of 13 mm under fastening of the back shock-absorber
83 — the Measured opening of 20 mm in a back skirt
84 — the Opening of 6.2 mm under fastening of back lengthening
86 — the Internal central opening of 7 mm in a back skirt
90 — the Opening of 8 mm under fastening of a ceiling upholstery
91 — the Top reperny opening of installation of back glass (on the right: 6.8 mm, at the left: 6.8х10 oo)
93 — the Top internal opening of 8 mm under fastening of the panel of finishing of salon
94 — the Lower internal opening of 8 mm under fastening of the panel of finishing of salon

95 — the Extended opening of 12.5х17 mm under fastening of a rear bumper
97 — the Opening of 7 mm in a back skirt under fastening of the panel of finishing of a luggage carrier
98 — the Lateral opening of 8.2 mm under fastening of a rear bumper
99 — the Opening of 8 mm under fastening of the back combined lamp
100 — the Opening of 8.2 mm under fastening of a beam of a rear bumper

Scheme of an arrangement of reference points of measurement of the lower part of a body (Sedan model)

50 — the Opening of 15 mm in a longeron under fastening of the radiator panel
51 — the Measured opening of 20 mm in a longeron
52 — the Measured opening of 20 mm in a longeron
53 — the Opening under a bolt of M14 of fastening of an element of a forward suspension bracket
54 — the Measured opening of 20 mm in a longeron
55 — the Opening under a bolt of M10 of fastening of a beam

56 — the Measured opening of 18 mm in a longeron
57 — the Measured opening of 25 mm in a back corner of the panel of a floor
58 — the Opening In in an intensifying beam (on the right: 15 mm, at the left: 12 mm)
59 — the Measured opening of 30 mm in a back corner of the panel of a floor


Details of an arrangement of reference points of measurement of a body)

* RH right
LH left

 


Measurement is performed by means of a special bar which probes have to be located in the centers of basic openings.

 


Order of performance of checks, control sizes

Front


Forward and lateral apertures


Central part of a body


Salon


Luggage compartment and door of a back