Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car

Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Service of loops and locks of the car
   Replacement wind and the other fixed glasses
   Removal and installation of a decorative front grille
   Removal and installation of the panel of protection of a case
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of loker of protection of arches of forward wheels
   Removal and installation of lateral overlays of body panels
   Removal and installation of a forward fairing
   Removal and installation of a back spoiler
   Removal and installation of lateral spoilers
   Removal and installation profile directing the top luggage carrier
   Removal installation of the main ware box
   Removal and installation of elements of the central console
   Removal and installation of the dashboard
   Removal and installation of panels of an internal upholstery of doors, including a back door (the Station wagon models Legacy and Outback) and a cover of a luggage compartment (Sedan model)
   Removal and installation of elements of internal finishing
   Seat belts - the general information, check of a state, removal and installation, an order of utilization of not worked emergency natyazhitel
   Removal, service and installation of seats
   Removal, installation and adjustment of a cowl
   Removal, installation and adjustment of the lock of a cowl
   Removal and installation of forward wings
   Removal, installation and adjustment of door panels
   Removal, service and installation of components of the top hatches
   Removal, installation and check of components of castle assemblies
   Removal, installation and adjustment of door glasses and components of window regulators
   Removal, service and installation of rear-view mirrors
   Removal, service and installation of screen wipers and components of a path of supply of the washing liquid
   Control body sizes
+ Onboard electric equipment

Removal, installation and adjustment of a cowl

Details of installation of a cowl


1 — the Cowl 2 — the Sealant 3 — the Loop Efforts of a tightening of threaded connections, Nanometer	T1: 24.5

Removal and installation

PERFORMANCE ORDER

1. Open a cowl and remove nozzles of supply of liquid of washing of a windshield.

2. Take clamps and remove the insulating panel of a cowl.

3. Turn out fixing bolts, separate a cowl from loopy levels and remove it from the car, - use the help of the assistant.

4. Installation is made upside-down, - tighten loopy bolts with the demanded effort (24.5 Nanometers). In summary make adjustment of landing of a cowl

Adjustment

PERFORMANCE ORDER

1. Gaps between side edges of a cowl and panels of forward wings have to be identical from both parties, - in case of need release loopy bolts and make the corresponding adjustment.

2. Adjustment of height of landing of a first line of a cowl is made by adjustment of castle assembly (see the Section Removal, installation and adjustment of the lock of a cowl) and a podkruchivaniye of rubber damping pillows.