Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car



Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Service of loops and locks of the car
   Replacement wind and the other fixed glasses
   Removal and installation of a decorative front grille
   Removal and installation of the panel of protection of a case
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of loker of protection of arches of forward wheels
   Removal and installation of lateral overlays of body panels
   Removal and installation of a forward fairing
   Removal and installation of a back spoiler
   Removal and installation of lateral spoilers
   Removal and installation profile directing the top luggage carrier
   Removal installation of the main ware box
   Removal and installation of elements of the central console
   Removal and installation of the dashboard
   Removal and installation of panels of an internal upholstery of doors, including a back door (the Station wagon models Legacy and Outback) and a cover of a luggage compartment (Sedan model)
   Removal and installation of elements of internal finishing
   Seat belts - the general information, check of a state, removal and installation, an order of utilization of not worked emergency natyazhitel
   Removal, service and installation of seats
   Removal, installation and adjustment of a cowl
   Removal, installation and adjustment of the lock of a cowl
   Removal and installation of forward wings
   Removal, installation and adjustment of door panels
   Removal, service and installation of components of the top hatches
   Removal, installation and check of components of castle assemblies
   Removal, installation and adjustment of door glasses and components of window regulators
   Removal, service and installation of rear-view mirrors
   Removal, service and installation of screen wipers and components of a path of supply of the washing liquid
   Control body sizes
+ Onboard electric equipment









d9f1bda0


Removal and installation of the dashboard

 The system of additional safety (SRS) is included in the standard package of all models of cars considered in the present manual. Before starting performance of any works near blocks of safety cushions, a steering column or the dashboard, disconnect SRS in order to avoid receiving injuries at its casual operation (see the Head Onboard electric equipment)! It is easy to distinguish an electrical wiring of a chain of SRS on yellow color of isolation.


 The description of procedures of removal/installation and service of a combination of devices see in the Head Onboard electric equipment.


Details of installation of the dashboard and elements of the central console

1 — the Dashboard
2 — the Deflector of an air duct of an obduv of lateral glass
3 — the Directing hook
4 — the Deflector of an air duct of an obduv of lateral glass
5 — the Deflector of a lateral air duct of ventilation of salon
6 — the Panel of a ware box
7 — the Cover of a ware box
8 — the Lateral panel of finishing of the central console
9 — the Lateral panel of finishing of the central console
10 — the Forward cover of the central console (model with AT)
11 — the Forward cover of the central console (model with RKPP)
12 — Assembly of back coasters
13 — the Console box
14 — the Back ashtray
15 — the Cover of a console box

16 — the Cover of console assembly
17 — the Tray
18 — the Ashtray
19 — the Lower cover
20 — the Central (console) section of finishing of the dashboard
21 — Assembly of a forward coaster
22 — the Panel of switches
23 — the Panel of facing of a combination of devices
24 — the Deflector of a lateral air duct of ventilation of salon
25 — Deflectors of the central air duct of ventilation of salon

Efforts of a tightening of threaded connections, Nanometer

Т: 7 ± 1

REMOVAL

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

2. Remove the left lower section of finishing of the dashboard.

3. Turn out the fixing screw and remove the lower cover of a casing of a steering column (see the Head Podvesk and a steering).
4. Remove the main ware box (see the Section Removal installation of the main ware box).

5. Remove the lower lateral panels of finishing of the central console.

6. Remove the module of a passenger frontal safety cushion (see the Head Onboard electric equipment).

7. Remove the top panels of finishing of both forward racks.

8. Remove the lower panel of finishing of a forward rack (an overlay of a threshold) from the passenger party of salon.

9. On hand-operated models functioning of systems of heating/air conditioning transfer the handle of a choice of temperature condition to extreme right situation (corresponding to the maximum intensity of heating of air), then disconnect a cable of the drive of the mixing gate from the lower part of assembly of a heater.

 At installation try not to allow changes of position of the handle and driving draft.

10. Turn out bolts of fastening of the dashboard.

 

11. Previously having marked, disunite contact sockets of an electrical wiring and carefully take the dashboard from salon of the car.

 At a rassoyedineniye of sockets do not pull for electrical wiring plaits at all!


12. Lay the removed assembly vertically on pair of wooden blocks, - try not to scratch a covering.

INSTALLATION

 PERFORMANCE ORDER

1. Installation is made as it should be, the return to an order of dismantle of components.

2. When landing the dashboard to the regular place track correctness of hit of three directing hooks in plugs of reciprocal openings through passage in the body panel. Try not to allow jammings of plaits of an electrical wiring, track reliability of fixing of contact sockets. The demanded size of effort of a tightening of fixing bolts makes 7 ± 1 Nanometer.