| Battery
|
| Battery type |
| Europe and North America |
| 4-cylinder models with RKPP | 55D23L, 48 And / h
|
|
|
Models of 2.0 l
| 65D23L, 52 And / h
|
Models of 2.5 l
| 75D23L, 52 And / h
|
| 6-cylinder models | 75D23L, 52 And / h
|
| Other countries |
|
| 34B19L, 27A/h
|
|
| 55D23L, 48 And / h
|
| Nominal rate of density of electrolyte at 20 °C *, piece | 1220 ÷ 1290
|
| * Recalculation on a formula: S = S20 +0.0007? (T - 20), where: S20 - nominal rate (at a temperature of 20 °C), T - temperature at which measurement is performed. |
| System of ignition
|
| Scheme of an arrangement of cylinders |
|
| General parameters |
| Ignition advancing corner, hail. (at rpm) |
|
| 10 ± 10 before BMT (700)
|
|
|
2001 vyp.
| 10 ± 8 before BMT (600)
|
2002 vyp.
| 10 ± 3 before BMT (600)
|
| Ignition coils |
| Type |
|
| FH0137, the manufacturer - Diamond
|
|
| FK0140, the manufacturer - Diamond
|
| Resistance of windings of coils of ignition (see illustrations 7.5 and 7.6), Ohm |
| Primary windings (between plugs 1 - 2 and 2 - 4) | 0.73 ± 10%
|
| Secondary windings (between plugs A - In and With - D) | 12800 ± 15%
|
| Spark plugs and VV electrical wiring |
| Type of spark plugs |
| L models 2.0 and 2.5 with OBD Subaru |
| With the catalytic Champion converter | RC10YC4 or NGKBKR5E-11
|
| Without catalytic converter | NGK BKR6E
|
| L models 2.0 and 2.5 with OBD II |
|
| Standard Champion | RC10YC4
|
| Alternative Champion | RC8YC4, NGK BKR6E-11 or Nippondenso K20PR-U11
|
| Models of 3.0 l | NGK PLFR6A-11
|
| Size of an interelectrode gap, mm |
- L models 2.0 and 2.5 with OBD II
| 1.0 ÷ 1.1
|
- L models 2.0 and 2.5 with OBD Subaru
|
With the catalytic converter
| 1.0 ÷ 1.1
|
Without catalytic converter
| 0.7 ÷ 0.8
|
| Models of 3.0 l | 1.0 ÷ 1.1
|
| System of a charge |
| Generator |
| Type |
| L models 2.0 and 2.5 |
| Models of 3.0 l | LR190-742, three-phase with the rotating winding - Mitsubishi Electric
|
| Polarity of grounding | «-»
|
| Tension, In / return Current, And |
| L models 2.0 and 2.5 | 12/90
|
| Models of 3.0 l | 12/100
|
| Way of connection of an anchor | 3-phase, star
|
| Straightening | Full, on 8 diodes
|
| Direction of rotation | Clockwise (on a view from the party of a pulley)
|
| Return current, not less, And |
| L models 2.0 and 2.5 |
| At turns of the mines-1 engine 1500
| 36
|
| At turns of the mines-1 engine 2500
| 65
|
| At turns of the mines-1 engine 5000
| 86
|
| Models of 3.0 l |
| At turns of the mines-1 engine 1500
| 43
|
| At turns of the mines-1 engine 2500
| 76
|
| At turns of the mines-1 engine 5000
| 100
|
| Adjustable tension at 20 °C, In | 14.1 ÷ 14.8
|
| Outer diameter of a contact ring of the generator, mm |
| Nominal rate | 22.7
|
| Limit admissible value | 22.1
|
| Resistance between contact rings, Ohm | 2.7 ÷ 3.2
|
| Length of brushes, mm |
| Nominal rate | 18.5
|
| Limit admissible value | 5.0
|
| System of start |
| Starter |
| Type |
| L models 2.0 and 2.5 |
| Models with RKPP | M000T83981, with a reducer, the manufacturer - Mitsubishi
|
| Models with AT | M001T86381, with a reducer, the manufacturer - Mitsubishi
|
| Models of 3.0 l |
| 2001 vyp. | TN128000-8321, with a reducer, the manufacturer - Nippondenso Tennessee
|
| 2002 vyp. | M001T86381, with a reducer, the manufacturer - Mitsubishi
|
| Starters | Nippondenso
|
| Tension, In/Power, kW | 12/1.4
|
| Direction of rotation | Counterclockwise (on a view from the party of a gear wheel)
|
| Quantity of teeths of a gear wheel | 9
|
| Parameters of the starter working without loading |
| Tension, In | 11
|
| Current, And | No more than 90
|
| Frequency of rotation, rpm | Not less than 2900
|
| Parameters of the starter working under loading |
| Tension, In | 8
|
| Current, And | No more than 370
|
| Torque, Nanometer | 13.7
|
| Frequency of rotation, rpm | Not less than 880
|
| Parameters of blocking of a starter |
| Tension, In | 5
|
| Current, And | No more than 1050
|
| Torque, Nanometer | Not less than 27.5
|
| Outer diameter of a collector of anchor assembly, mm |
| Nominal rate | 30
|
| Limit admissible value | 29
|
| Radial beating of a collector of anchor assembly, mm |
| Nominal rate | 0.05
|
| Limit admissible value | 0.10
|
| Depth of undercutting of isolation between lamels of a collector, mm |
| Nominal rate | 0.6
|
| Limit admissible value | 0.2
|
| Length of coal brushes, mm |
| Nominal rate | 17.0
|
| Limit admissible value | 11.5
|
| Mitsubishi starters |
| Tension, In/Power, kW |
| M000T83981 | 12/1.0
|
| M001T86381 | 12/1.4
|
| Direction of rotation | Counterclockwise (on a view from the party of a gear wheel)
|
| Quantity of teeths of a gear wheel |
| M000T83981 | 8
|
| M001T86381 | 9
|
| Parameters of the starter working without loading |
| Tension, In | 11
|
| Current, And | No more than 90
|
| Frequency of rotation, rpm |
| M000T83981 | Not less than 2800
|
| M001T86381 | Not less than 2400
|
| Parameters of the starter working under loading |
| M000T83981 |
| Tension, In | 7.5
|
| Current, And | 300
|
| Torque, Nanometer | Not less than 8.6
|
| Frequency of rotation, rpm | Not less than 920
|
| M001T86381 |
| L models 2.0 and 2.5 with AT |
| Tension, In | 7.7
|
| Current, And | 400
|
| Torque, Nanometer | Not less than 16.0
|
| Frequency of rotation, rpm | Not less than 740
|
| Models of 3.0 l |
| Tension, In | 8
|
| Current, And | No more than 280
|
| Torque, Nanometer | 13.7
|
| Frequency of rotation, rpm | Not less than 980
|
| Parameters of blocking of a starter |
| M000T83981 |
| Tension, In | 4
|
| Current, And | No more than 650
|
| Torque, Nanometer | Not less than 14.7
|
| M001T86381 |
| L models 2.0 and 2.5 with AT |
| Tension, In | 3.5
|
| Current, And | No more than 940
|
| Torque, Nanometer | Not less than 28.9
|
| Models of 3.0 l |
| Tension, In | 3
|
| Current, And | No more than 780
|
| Torque, Nanometer | Not less than 21.8
|
| Radial beating of a collector of anchor assembly, mm |
| Nominal rate | 0.05
|
| Limit admissible value | 0.10
|
| Depth of undercutting of isolation between lamels and a collector, mm | 0.5
|
| Length of coal brushes, mm |
| Nominal rate | 12.3
|
| Limit admissible value | 7.0
|
| The effort developed by brush springs, N |
| Nominal rate (new brush) | 21.6
|
| Limit admissible value | 5.9
|
| Departure of a driving gear wheel, mm | 0.5 ÷ 2.0
|
| Efforts of a tightening of threaded connections, Nanometer |
|
|
Efforts of a tightening of threaded connections are given also in the text of the Head and on sopr. illustrations. |
|
| Nuts of a clamping level of the battery | 3.4
|
| Spark plugs | 21
|
| Bolts of fastening of the module(s) of ignition |
| L models 2.0 and 2.5 | 6.4
|
| Models of 3.0 l | 16
|
| Generator pulley nut | 63.7
|
| Coupling bolts of covers of the generator | 3.1
|
| Bolts of fastening of a starter | 50
|
