Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car



Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Design and the principle of functioning of elements of the hydrostrengthened steering drive - the general information
      Adjustable safety steering column - the general information
      Removal and installation of a steering wheel
      Removal, check of a state and installation of the cardan hinge of a steering column
      Removal, service and installation of a steering column
      Removal, service and installation of the steering mechanism
      Removal, installation and check of a condition of elements of a hydraulic path of GUR
      Removal, service and installation of the steering pump
      Removal and installation of the tank of GUR liquid
      Check and replacement of GUR liquid, removal of air from a hydraulic path
   + Wheel assemblies, suspension bracket geometry
+ Body
+ Onboard electric equipment




d9f1bda0



Removal and installation of the tank of GUR liquid

The scheme of connection of a tube of D and the soaking-up hose (l models 2.0 and 2.5)

1 — the Soaking-up hose
2 — the Tube of D

3 — the Returnable hose


The scheme of connection of the returnable and soaking-up hoses (model of 3.0 l)

1 — the Soaking-up hose

2 — the Returnable hose


 PERFORMANCE ORDER

1. Empty the tank of system of hydrostrengthening of a wheel.
2. On models 2.0 and 2.5 of l disconnect a tube of D from a returnable hose, and the soaking-up hose from the steering pump.

 Try not to allow hits of hydraulic liquid on a driving belt, in order to avoid hit in system of dirt at once to a zakuporta, or wrap up pure rags the open ends of lines!

3. On models of 3.0 l disconnect the soaking-up and returnable hoses from the tank.

 Try not to allow hits of hydraulic liquid on a driving belt, in order to avoid hit in system of dirt at once to a zakuporta, or wrap up pure rags the open ends of lines!

4. Having pulled up, release the tank from a basic arm.
5. Check the removed tank for existence of cracks, cuts and other mechanical damages. In case of need make replacement.
6. Installation is made as it should be, the return to an order of dismantle of components.
7. In summary fill system of hydrostrengthening of a wheel with fresh hydraulic liquid (see the Section Check and GUR liquid replacement, removal of air from a hydraulic path).