Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car

Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Design and the principle of functioning of elements of the hydrostrengthened steering drive - the general information
      Adjustable safety steering column - the general information
      Removal and installation of a steering wheel
      Removal, check of a state and installation of the cardan hinge of a steering column
      Removal, service and installation of a steering column
      Removal, service and installation of the steering mechanism
      Removal, installation and check of a condition of elements of a hydraulic path of GUR
      Removal, service and installation of the steering pump
      Removal and installation of the tank of GUR liquid
      Check and replacement of GUR liquid, removal of air from a hydraulic path
   + Wheel assemblies, suspension bracket geometry
+ Body
+ Onboard electric equipment

Adjustable safety steering column - the general information

Mechanism of adjustment of height of provision of a steering column

The fixing mechanism design the helmsman of a column allows to regulate height of provision of a steering wheel within the range of 35 mm.

Mechanism of adjustment of height of provision of a steering column


1 — the Adjustable steering column	2 — the Lever of an otpuskaniye of the fixing mechanism

Principle of operation of udaropogloshchayushchy mechanisms


1 — Sreznaya a plate 2 — Cam clamps	4 — Before cutting 5 — After cutting

Safety udaropogloshchayushchy mechanism

For the purpose of repayment of energy of blow of the power unit which is displaced at a head-on collision back in a tube of a steering column the cam clamps collapsing at excess by the arising overload of some certain value are established. At destruction of clamps they adjoin toes with each other, perceiving on themselves the loading bending a column.

One more adaptation urged to absorb energy of longitudinal blow is the srezny plate established between a steering column and the arm of the fixing mechanism of adjustment of height of provision of a column fixed on the bearing beam. At excess by the arising overload of some certain value the emphasis of a plate is cut off, dynamically absorbing energy of blow.

The bearing beam of a steering column

Fastening the helmsman of a column is provided by means of the bearing beam established across the car. The beam is placed on the minimum possible removal from a steering wheel for the purpose of the maximum decrease in console loading. The top bearing of a steering shaft is also installed as it is possible closer to a steering wheel, providing the reliable support guaranteeing the fullest repayment of the vibrations arising during the movement.