Subaru Legacy/Outback

1. Separate back section of system of production of the fulfilled gases from a lobby, remove back section of system of release assembled with the muffler (see the Head of the Power supply system and release).
2. Remove assembly of back differential (see the Head Stsepleniye).
3. Disconnect from a stretcher forward, back and top cross levers (see the Sections Removal and installation of the forward cross lever of a back suspension bracket, Removal, service and installation of the back cross lever of a back suspension bracket and Removal, service and installation of the top cross lever of a back suspension bracket).

4. Prop up a stretcher a transmission jack.

5. Remove a forward extension of a stretcher (see the Section Removal and installation of forward extensions of a back stretcher).
6. Turn out fixing bolts and take a stretcher from under the car.
7. Check the removed components for existence of signs of wear and damages, replace the failed details.

1. Installation is made as it should be, the return to an order of dismantle of components. Track that in the course of installation longitudinal levers were leveled on a jack horizontally.
2. In summary drive away the car on car repair shop for check and adjustment of corners of installation of back wheels.