Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car


Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   - Back suspension bracket
      Removal, check of a condition of components and installation of the back stabilizer of cross stability
      Removal, service and installation of longitudinal levers of a back suspension bracket
      Removal, service and installation of the top cross lever of a back suspension bracket
      Removal, service and installation of back telescopic shock-absorbers
      Removal and installation of the forward cross lever of a back suspension bracket
      Removal, service and installation of the back cross lever of a back suspension bracket
      Removal and installation of forward extensions of a back stretcher
      Removal and installation of a back stretcher
      Removal and installation of buffer elements
   + Steering
   + Wheel assemblies, suspension bracket geometry
+ Body
+ Onboard electric equipment



d9f1bda0

Removal, service and installation of the top cross lever of a back suspension bracket

Track horizontal position of an arrangement of the longitudinal lever of a back suspension bracket on a jack

1 — the Longitudinal lever

2 — the Transmission jack

REMOVAL

 PERFORMANCE ORDER

1. Release wheel nuts, a back of the car and establish to a poddomkratta it on props, remove back wheels.
2. Prop up the leveled horizontally longitudinal lever of a back suspension bracket a transmission jack.

3. Give a fixing nut and take an axial bolt of fastening of the top cross lever to a stretcher.

4. Give a nut of the second axial bolt, separate the top cross lever from the longitudinal lever of a suspension bracket and take it from under the car.

5. Visually estimate a condition of the removed lever and its axial plugs, replace the failed components.

Replacement of axial plugs

 PERFORMANCE ORDER

Replacement of axial plugs of back levers is made by means of a set of mandrels of ST 20099AE010 and carried out in similar described above (see the Section Removal, service and installation of longitudinal levers of a back suspension bracket) for longitudinal levers to a manner.

 The external plug has to be installed by the extended party of an internal casing on the car back!

INSTALLATION

 PERFORMANCE ORDER

 Samokontryashchiyesya nuts is subject to replacement without fail!

Installation is made as it should be, the return to an order of dismantle of components, - track that the longitudinal lever held strictly horizontal position on a jack. Samokontryashchiyesya nuts of axial bolts of the lever should be tightened with the demanded effort (120 Nanometers).