Subaru Legacy/Outback

1999-2003 of release

Repair and operation of the car



Subaru of Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Electric equipment of the engine
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   - Forward suspension bracket
      Removal, service and installation of cross levers of a forward suspension bracket
      Removal, check of a state and installation of spherical support
      Removal, service and installation of forward racks
      Removal, check of a condition of components and installation of the forward stabilizer of cross stability
      Removal and installation of a cross beam of a forward suspension bracket
   + Back suspension bracket
   + Steering
   + Wheel assemblies, suspension bracket geometry
+ Body
+ Onboard electric equipment




d9f1bda0



Removal, check of a condition of components and installation of the forward stabilizer of cross stability

Details of installation of fastening to a cross beam of a suspension bracket of a domkratny plate and a bar of the stabilizer of cross stability

1 — a stabilizer Bar
2 — the Cross beam

3 — Domkratnaya a plate


Track correctness of landing and compliance of color marking of rubber plugs on a bar of the stabilizer of cross stability

1 — the Landing tag on a stabilizer bar

2 — the Color identification tag

REMOVAL

 PERFORMANCE ORDER

1. A car front also establish to Poddomkratta it on props.
2. Remove the domkratny plate established from the lower party of a forward cross beam.
3. Turn out boats of collars of fastening of a bar of the stabilizer of cross resistance to a cross beam.

4. Turn out bolts of fastening of racks of the stabilizer to cross levers of a suspension bracket. Also take a bar of the stabilizer of cross stability from under the car.

CHECK

 PERFORMANCE ORDER

1. Check rubber plugs for existence of signs of aging of material, cracks, cuts and other damages, replace the failed components.
2. Check stabilizer racks for existence of deformations, cracks and other damages, estimate density of landing of rubber-metal plugs. In case of need replace racks.

INSTALLATION

 PERFORMANCE ORDER

 Samokontryashchiyesya nuts is subject to replacement without fail!

Installation is made as it should be, the return to an order of dismantle of components. Track that adjusting tags on rubber plugs of collars of fastening of a bar of the stabilizer to a cross beam correctly were combined with landing tags on a bar, also track compliance of color of marking of plugs to color of landing tags on a bar. Tighten all fixture with the demanded effort.