|
Subaru Legacy/Outback1999-2003 of releaseRepair and operation of the car |
|
Subaru of Legasi, Autbek + Cars Subaru Legacy, Outback - Operation manual - Access, protection Keys - the general information Door locks The uniform lock (at the corresponding complete set) Switch ignition/lock of blocking of a steering column System of an immobilization of the engine Window regulators Cover of a luggage compartment (Legacy Sedan) Back door (Legacy Versatile person and Outback) The top hatches (at the corresponding complete set) Access to podkapotny space + Elements of security systems + Equipment of the car, arrangement of devices and governing bodies + Comfort + Methods of operation + Routine maintenance + Engine + Cooling systems, heating + Power supply system and release + Electric equipment of the engine + Manual box and differential + Automatic transmission + Coupling + Brake system + Suspension bracket and steering + Body + Onboard electric equipment |
System of an immobilization of the engine
The engine immobilization device can be included in the standard package of anticreeping system of some models (more simply - an immobilizator). The device serves for prevention of attempts of unauthorized start of the engine and is effective anticreeping remedy, protecting the car from stealing. In a head of keys of the models equipped with system of an immobilization of the engine the microchip making shutdown of the anti-theft device immobilizing the engine is built in.
The engine of the car equipped with an immobilizator can be started only by means of the ignition key equipped with the built-in microchip. In a microchip the special code is ciphered, and the anticreeping system makes blocking shutdown only in case of its identification. Attempt of start of the engine by means of any other key or a master key leads to shutdown of a chain of start of the engine. The control lamp of an immobilizer is intended for the warning of potential car thieves of existence on the car of the relevant anticreeping system. The lamp starts blinking approximately in 60 seconds after the ignition key turn from the situation "ON" in the situation "ASS" or "LOCK", or directly after extraction of a key. Refusal of activation of a lamp testifies to malfunctions in system of an immobilization.
At ignition inclusion (the ignition key will turn in the situation "ON") the control lamp of system of an immobilization lights up for some seconds, then dies away. The blinking of the indicator says that the system did not identify a key code. In this case it is necessary to switch off ignition (a key - in the situation "LOCK"), to take out a key from the lock, then to repeat attempt.
If the system repeatedly refuses to identify a key code, address on Subaru car repair shop. Do not make attempts to make any changes and additions to an immobilizator design. It can break normal functioning of electronic systems of the car and make it uncontrollable. In case of loss of a key and impossibility of start of the engine, address on Subaru car repair shop. Production of duplicates of the keys equipped with the built-in microchip Production of a twirl requires its identification number (see the Section Keys - the general information). Before use any new key has to be registered in system of an immobilization. Registration to four keys on one car is allowed. For safety reasons at production of a new key codes of all other keys will be erased and re-registered. Therefore it is necessary to provide in a workshop all keys from the car. Not re-registered keys cannot be used together with the re-registered. With system of an immobilizer address for information on production of new keys and their registration at Subaru car repair shop. |
|