| Coupling |
| General parameters |
| Liquid of the hydraulic drive of coupling of FMVSS No. 116, or DOT3 or DOT4 brake fluid |
| Coupling sensor switch plunger vystupaniye size (disconnection of a chain of a starter), mm | 2+1.5 |
| Basket |
| Loading of diaphragm springs, kg |
| European models | 550 |
| American models | |
| Models of 2.0 l | 450 |
| Models of 2.5 l | 580 |
| The frictional (conducted) disk |
| Sizes of a frictional disk (plank beds. ÷ ÷ vnutr. ÷ ÷ thickness), mm |
| European models | 228.6 ÷ 155 ÷ 6.6 |
| American models | 225 ÷ 150 ÷ 3.5 |
| Outer diameter of shlitsevy connection of a frictional disk, mm | 25.2 |
| The minimum admissible residual thickness of frictional slips (height of a vystupaniye of their surface over heads of rivets), mm | 0.3 |
| The limit admissible size of a beating of a frictional disk on the radius of 107 mm, mm | 1.00 |
| Switching off lever |
| Coefficient of transfer of the lever | 1.6 |
| Size of the course of the lever, mm | 12 ÷ 13.6 |
| Pedal |
| Size of a full speed, mm | 130 ÷ 135 |
| The size of a lateral side play pedet couplings at effort of 10 N (on a block), mm | 5 |
| Vyzhimna bearing |
| Limit admissible size of a radial side play, mm | 1.4 |
| Forward power shafts |
| Assembly type (models with RKPP) | BJ87+SFJ82 |
| Diameter, mm | |
| Models of 2.5 l with RKPP | 28 |
| Other models | 26 |
| Color of protective covers of CV JOINTS |
| Models of 2.5 l with RKPP | The pink |
| Other models | - |
| Effort of a tightening of bandage tapes of protective covers of CV JOINTS, Nanometer |
| Tapes of bigger diameter | Not less than 157 |
| Tapes of smaller diameter | Not less than 133 |
| Back power shafts |
| Type and identification marking of a back power shaft |
| Models of 2.0 l with AT 79AC (without identification a nakatok) | |
| Models of 2.0 l and 2.5 l from RKPP and model of 2.5 l with AT (without VDC) | 79AC-RH, 79AC-LH (one identification nakatka) |
| Models of 3.0 l and 2.5 l with AT | (with VDC) B2AC-RH, B2AC-LH (two identification nakatka) |
| Driveshaft | |
| Geometrical parameters, mm |
| Distance between forward cardan and central hinges (L1), mm |
| Models about the shock-absorber | 629 |
| Models with RKPP | 688 |
| Distance between back cardan and central hinges (L2), mm | 773 |
| Diameter of pipes |
| D1 | 63.5 |
| D2 | 57.0 |
| The limit admissible size of a beating of sections of the driveshaft (in the central part of pipes), mm | 0.6 |
| Back differential |
| Type |
| Legacy models |
| Models of 2.0 l |
| WITH AT | VA type (XJ) |
| WITH RKPP | T-type (T1) |
| Models of 2.5 l |
| WITH AT | T-type (T2) |
| WITH RKPP | T-type (VB) |
| Outback models | |
| Models of 2.5 l | |
| With AT (without VDC) | T-type (TP) |
| North America | T-type (T2) |
| Latin and South America | T-type (CF with LSD) |
| With AT (with VDC) | T-type (BL) |
| WITH RKPP | T-type (T1) |
| Models of 3.0 l (with AT and with VDC) | T-type (T2) |
| Transfer relation |
| Legacy models |
| Models of 2.0 l |
| WITH AT | 4.111:1 (37/9) |
| WITH RKPP | 3.900:1 (39/10) |
| Models of 2.5 l |
| WITH AT | 4.111:1 (37/9) |
| WITH RKPP | 3.700:1 (37/10) |
| Outback models |
| Models of 2.5 l |
| WITH AT | 4.444:1 (40/9) |
| WITH RKPP | 4.111:1 (37/9) |
| Models of 3.0 l | 4.111:1 (37/9) |
| Type of oil of back differential | GL-5 |
| Transfer type | gipoidny |
| Volume of oil of back differential, l | 0.8 |
| Pretightness of forward and back bearings (on a bolted opening of a connecting flange), N |
| T-type |
| New bearings | 19.6 ÷ 28.4 |
| Reusable bearings | 8.34 ÷ 16.67 |
| VA type |
| New bearings | 12.7 ÷ 32.4 |
| Side play of gearing of lateral gear wheels, mm |
| T-type | 0.10 ÷ 0.20 |
| VA type | 0.05 ÷ 0.15 |
| Standard width of lateral gear wheels, mm | 20.00 |
| Side play of gearing of the koronchaty conducted and conducting mm gear wheels |
| T-type | 0.10 ÷ 0.20 |
| VA type | 0.10 ÷ 0.15 |
| Beating of a koronchaty gear wheel (on a back surface), no more, than a mm | 0.05 |
| Resistance of the leading gear wheel to rotation, N | 2.9 ÷ 10.8 |
| Efforts of a tightening of threaded connections, Nanometer |
|
|
Efforts of a tightening of threaded connections are given also in the text of the Head and on sopr. illustrations. |
|
| Coupling |
| Bolts of fastening of a basket of coupling | 15.7 |
| Bolts of fastening of a flywheel | 72 |
| Spherical emphasis of the lever of switching off of coupling | 15.7 |
| Nuts of fastening of the main cylinder of coupling | 18 |
| Nipple nuts of a tube of a hydraulic actuator of coupling | 15 |
| Bolt of fastening of an arm of a hose of a hydraulic actuator of coupling | 37 |
| Bolts of fastening of the executive cylinder of coupling | 37 |
| Nipple bolt of fastening of a hose of a hydraulic actuator of coupling to the executive cylinder | 18 |
| Gate of pumping of the executive cylinder of coupling | 8 |
| (A lock-nut of the sensor switch of coupling of model with tempostaty) | 8 |
| Lock-nuts of the sensor switch of stoplights | 8 |
| Lock-nut of a rod of a pusher of the main cylinder of coupling | 10 |
| Forward power shafts |
| Stupichny nut | 216 |
| Wheel nuts | 88 |
| Samokontryashchayasya a nut of fastening of a rack of a suspension bracket to a rotary fist | 177 |
| Bolts of a brake board to a rotary fist | 18 |
| Back power shafts |
| Stupichny nut | 186 |
| Wheel nuts | 88 |
| Bolts of fastening of the stupichny bearing | 66 |
| Driveshaft and back differential | |
| Bolts of a basic arm of the central bearing of the driveshaft | 52 |
| Nuts of fastening of the driveshaft to a connecting flange of the leading gear wheel of back differential | 31 |
| Drain and jellied traffic jams of back differential |
| T-type | 49 |
| VA type | 34 |
| Samokontryashchayasya nut of fastening of a connecting flange of back differential |
| T-type | 181 |
| VA type | 188 |
| Bolts of fastening of a forward beam of back differential |
| The central | 65 |
| The axial | 110 |
| Samokontryashchiyesya nuts of fastening of back differential to a back cross beam | 70 |
| Nuts of fastening of protection of back differential | 65 |
| Nut of the leading gear wheel of back differential | 181 |
| Bolts of fastening of the koronchaty conducted gear wheel | |
| T-type | 103 |
| VA type | 62 |
| Bolts of fastening of holders of lateral bearings | 10.3 |
| Bolts of fastening of a back cover | |
| T-type | 29 |
| VA type | 25 |
| Bolts of fastening of a blocking plate of the holder of the lateral bearing (VA type) | 25 |
